Cartridge filters

Cartridge Filters

Meltblown

Our meltblown cartridges are made up of numerous fibre zones, providing a graded structure throughout the filters depth. Having multiple zones means our filters can perform for longer through the use of depth filtration.

  • Supplied in either 10”, 20”, 30” or 40” lengths.
  • Gradients ranging from 1 – 100 microns.
  • Polypropylene material with an outside diameter of 63mm.
  • D.O.E as standard, – also available with thermally welded end caps such as ‘Amazon A’ style, and fin / flat closed ends.
  • 10” and 20” lengths also available in large diameter with an o.d. of 114mm, and ranges of 1 – 50 microns.
  • Can be supplied as high efficiency, high collapse strength or absolute, as well as wound polypropylene cartridges with micron gradients of 1 – 200.

Carbon Block

Activated carbon is used to absorb various contaminants from water. It is particularly useful in removing organics, odours, odd tastes & bacteria as well as chlorine from the water. Small carbon filters are available to fit the standard 10” & 20” standard filters and larger back-washable media filters are available for higher flowrates.

Pleated

Pleated filters remove the suspended solids on the surface of the filters material. They are designed to maximise dirt holding capacity and minimise pressure drop at high flow rates. The filter media is both bacteria and chemical resistant and has a high wet strength. The media is formed around a polypropylene core for added strength. The standard filters offer 95% removal efficiency and the absolute range are 99%.

Cyclone Filters

Cyclonic filters operate by pumping the liquid to be filtered tangentially into the filter body. This results in a cyclonic action within the filters body whereby the dense suspended solids are thrown to the outside edge of the vessel under centrifugal force. The filtered liquid then reverses direction travelling up through the filter body and out leaving the dense solids at the base of the vessel where it is removed through the ½” drain valve.

FilterBlue

FilterBlue cartridges are specifically designed to suit the FilterBlue housings. Each 20” cartridge filter can operate at pressures up to 10bar, with a maximum flowrate of 12,000 – 18,000lph, depending upon micron rating. Higher flowrates can be achieved by using multiples of cartridges.

  • 95% removal efficiency.
  • Available in dual gradient melt-blown (1-10, 5-20, 20-50 or 50-90micron).
  • Available in pleated polypropylene (1,5,10,20 or 50micron).
  • Available in washable pleated polyester (20 or 50micron).

The washable filter may be washed and re-used up to 400 times, thereby reducing operating costs in waters with high suspended solids.

FilterMax

FilterMax cartridges are specifically designed to suit the 13” or 20” FilterMax housing.

  • 95% removal efficiency with a high flow rate across the range.
  • Available in dual gradient melt-blown (1-10, 5-20, 20-50 or 50-90micron).
  • Available in pleated polypropylene (1,5,10,20 or 50micron).
  • Available in washable pleated polyester (20 or 50micron).

Flowrates vary between 12,000 – 27,000lph depending on size and micron rating.

FilterOne

FilterOne cartridges are specifically designed to suit the 23” or 40” FilterOne housing.

  • 95% removal efficiency and high flow rate across the range.
  • Available in dual gradient melt-blown (1-10, 5-20, 20-50 or 50-90micron).
  • Available in pleated polypropylene (1,5,10,20 or 50micron).
  • Available in washable pleated polyester (20 or 50micron).

The washable filter may be washed and re-used up to 400 times thereby reducing operating costs in waters with high suspended solids. Flowrates vary between 10,000 – 30,000lph depending on size and micron rating, and operate at pressures up to 6bar.

Contact Us